Go to click on SN9C202 (Phase out) this will take you to another page where you can find SN9C201/202v1.01.0001MacOSX (1790KB) undel big 'Downloads' on right side. I'm using safari. Or maybe just use this if you download driver from sonix you'll get quicktime component and WebCam Monitor.app maybe all you need is patched quicktime component but i haven't tried that hello frantisheq. I've tried ur method. My cam is buit in.

And it's hp webcam here is the info. Version: 6.04 Bus Power (mA): 500 Speed: Up to 480 Mb/sec Manufacturer: Chicony Electronics Co., Ltd. Product ID: 0xb016 Serial Number: SN0001 Vendor ID: 0x04f2 i installed the sonix driver. And webcam monitor does work. I just need to change fram setting to less then 5 each time i wanna use the webcam monitor program. I did installed the patch you provided. But for my cam i searched everywhere i couldn't find bringe + sensor combination.

So i just picked HV7131R which i think it was a close call. I added the Ven and product id to HV7131R webcam saved plist and everything was ok.

And when i clicked ichat. The iusb showed a new webcam detected. With this name HV7131R webcam.

But when i tried turning the cam on in ichat. It didn't turn on the cam's light or it didn't turn the cam on at all. Although it does turn on when i'm using the webcam monitor application from sonix. So i don't know, if you can give any advice i'll appreciate it. And sorry i typed to much.

Oh one more thing. Did you try macam.

If you look inside macam source package which comes with the installation. Inside a folder called cameras. You'll see all the supported drivers and a file called example.m. That file shows how to add ven and product id. I tried doing it but it got a bit confusing so i stopped. Note: my cam works in yahoo and a couple of other programs. Like murcary for msn messenger.

And camtwist. Hello frantisheq.

I've tried ur method. My cam is buit in. And it's hp webcam here is the info. Version: 6.04 Bus Power (mA): 500 Speed: Up to 480 Mb/sec Manufacturer: Chicony Electronics Co., Ltd. Product ID: 0xb016 Serial Number: SN0001 Vendor ID: 0x04f2 i installed the sonix driver. And webcam monitor does work.

Lifecam Vx 6000 Driver Windows 10

I just need to change fram setting to less then 5 each time i wanna use the webcam monitor program. I did installed the patch you provided.

But for my cam i searched everywhere i couldn't find bringe + sensor combination. So i just picked HV7131R which i think it was a close call. I added the Ven and product id to HV7131R webcam saved plist and everything was ok. And when i clicked ichat. The iusb showed a new webcam detected.

With this name HV7131R webcam. But when i tried turning the cam on in ichat. It didn't turn on the cam's light or it didn't turn the cam on at all. Although it does turn on when i'm using the webcam monitor application from sonix.

So i don't know, if you can give any advice i'll appreciate it. And sorry i typed to much. Oh one more thing. Did you try macam.

If you look inside macam source package which comes with the installation. Inside a folder called cameras.

You'll see all the supported drivers and a file called example.m. That file shows how to add ven and product id. I tried doing it but it got a bit confusing so i stopped.

Note: my cam works in yahoo and a couple of other programs. Like murcary for msn messenger. And camtwist. If you have used SN9C20 1+HV7131R maybe you should try SN9C20 2+HV7131R.

Or vice versa. Don't forget to change device id you have used before. Hi, somewhat of a noob, but please forgive me if i sound it. I must ditto a previous request regarding Microsoft's LifeCam VX-1000, i recently purchased it, due to the price and so far, not so good. The cam is displaying a psychedelic strobe effect, which seems to die down (i've read about it elsewhere), also the picture is very grainy, and seems to be looked into a zoomed position.

I've tried different drivers but still the same effect. Any help, advice or suggestions would be great. I have read that there are solutions in progress for macam, so i may have to be patient, and i can understand that. Saddly i don't understand why there is such an issue with webcams and mac, considering the fact that other 'computer accessories' seem to not be as much of a problem.

Thanks in advance. Hi, somewhat of a noob, but please forgive me if i sound it. I must ditto a previous request regarding Microsoft's LifeCam VX-1000, i recently purchased it, due to the price and so far, not so good.

The cam is displaying a psychedelic strobe effect, which seems to die down (i've read about it elsewhere), also the picture is very grainy, and seems to be looked into a zoomed position. I've tried different drivers but still the same effect. Any help, advice or suggestions would be great. I have read that there are solutions in progress for macam, so i may have to be patient, and i can understand that.

Saddly i don't understand why there is such an issue with webcams and mac, considering the fact that other 'computer accessories' seem to not be as much of a problem. Thanks in advance. Looks like it should work. I'll try to patch the driver for you if it's possible. EDIT: VX-6000 is based on SN9C201 but VX-1000 is based on SN9C105R. Anyway i'll try to fix the SN9C105R driver.

Hi, thanks for the fast reply. I tried it and so far it still isn't working. Results are the same.

I was wondering about conflicts, do i need to get rid of possible conflicting files off my computer, or just in the quick time folder? I did have some flip4mac files in the Quick Time folder too, i moved them to desktop to get them out, but still no change. I have been trying to figure out the driver issue for several hours now, since yesterday when i got the cam but i am a rookie.

I'm kind of surprised too, since i had better success in the past with a fairly older logitech cam which no longer works. Once the 'psychedelic' lighting tends to ease up, the picture is still really grainy, and is really sensitive to light. I'm pretty sure i did everything right. Hi, thanks for the fast reply.

I tried it and so far it still isn't working. Results are the same. I was wondering about conflicts, do i need to get rid of possible conflicting files off my computer, or just in the quick time folder?

I did have some flip4mac files in the Quick Time folder too, i moved them to desktop to get them out, but still no change. I have been trying to figure out the driver issue for several hours now, since yesterday when i got the cam but i am a rookie.

I'm kind of surprised too, since i had better success in the past with a fairly older logitech cam which no longer works. Once the 'psychedelic' lighting tends to ease up, the picture is still really grainy, and is really sensitive to light. I'm pretty sure i did everything right. Maybe it'll work as sn9c102+something i'll try tomorrow.

Vx6000 should be sn9c202 but for me it only worked as sn9c201. Hi, still no luck on my end. I'll assume that there may be some fixes if and/or when a new version of macam comes out. For the price of the cam (vx-1000) i got it at, i don't think i'll just return it, but i may try to get another cam for the meantime, depends tho, since i've seen most cams at/or above 40$ (can), i payed 20$ (can) for the vx-1000. Thanks again.

I got my VX-1000 to work on my Mac OSX Leopard. Here are the steps: 1 Download the Sonix driver as stated above. 2 Install the driver as per instruction. 3 Open Library/Quicktime/Contents/Info.plist 4 Search for idproduct 24827. 5 Change idproduct to 247 and idvendor to 1118 6 Look for the key and change the value to 0 7 Save changes and close file Make sure to delete macam or other drivers/components too.